Mercurial > otakunoraifu
diff aclocal.m4 @ 0:223b71206888
Initial import
author | thib |
---|---|
date | Fri, 01 Aug 2008 16:32:45 +0000 |
parents | |
children |
line wrap: on
line diff
new file mode 100644 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,561 @@ +# generated automatically by aclocal 1.9.5 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Configure paths for FreeType2 +# Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor +# +# Copyright 2001, 2003 by +# David Turner, Robert Wilhelm, and Werner Lemberg. +# +# This file is part of the FreeType project, and may only be used, modified, +# and distributed under the terms of the FreeType project license, +# LICENSE.TXT. By continuing to use, modify, or distribute this file you +# indicate that you have read the license and understand and accept it +# fully. +# +# serial 2 + +# AC_CHECK_FT2([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +# Test for FreeType 2, and define FT2_CFLAGS and FT2_LIBS. +# MINIMUM-VERSION is what libtool reports; the default is `7.0.1' (this is +# FreeType 2.0.4). +# +AC_DEFUN([AC_CHECK_FT2], + [# Get the cflags and libraries from the freetype-config script + # + AC_ARG_WITH([ft-prefix], + dnl don't quote AS_HELP_STRING! + AS_HELP_STRING([--with-ft-prefix=PREFIX], + [Prefix where FreeType is installed (optional)]), + [ft_config_prefix="$withval"], + [ft_config_prefix=""]) + + AC_ARG_WITH([ft-exec-prefix], + dnl don't quote AS_HELP_STRING! + AS_HELP_STRING([--with-ft-exec-prefix=PREFIX], + [Exec prefix where FreeType is installed (optional)]), + [ft_config_exec_prefix="$withval"], + [ft_config_exec_prefix=""]) + + AC_ARG_ENABLE([freetypetest], + dnl don't quote AS_HELP_STRING! + AS_HELP_STRING([--disable-freetypetest], + [Do not try to compile and run a test FreeType program]), + [], + [enable_fttest=yes]) + + if test x$ft_config_exec_prefix != x ; then + ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix" + if test x${FT2_CONFIG+set} != xset ; then + FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config + fi + fi + + if test x$ft_config_prefix != x ; then + ft_config_args="$ft_config_args --prefix=$ft_config_prefix" + if test x${FT2_CONFIG+set} != xset ; then + FT2_CONFIG=$ft_config_prefix/bin/freetype-config + fi + fi + + AC_PATH_PROG([FT2_CONFIG], [freetype-config], [no]) + + min_ft_version=m4_if([$1], [], [7.0.1], [$1]) + AC_MSG_CHECKING([for FreeType -- version >= $min_ft_version]) + no_ft="" + if test "$FT2_CONFIG" = "no" ; then + no_ft=yes + else + FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags` + FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs` + ft_config_major_version=`$FT2_CONFIG $ft_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + ft_config_minor_version=`$FT2_CONFIG $ft_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + ft_config_micro_version=`$FT2_CONFIG $ft_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + ft_min_major_version=`echo $min_ft_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + ft_min_minor_version=`echo $min_ft_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + ft_min_micro_version=`echo $min_ft_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test x$enable_fttest = xyes ; then + ft_config_is_lt="" + if test $ft_config_major_version -lt $ft_min_major_version ; then + ft_config_is_lt=yes + else + if test $ft_config_major_version -eq $ft_min_major_version ; then + if test $ft_config_minor_version -lt $ft_min_minor_version ; then + ft_config_is_lt=yes + else + if test $ft_config_minor_version -eq $ft_min_minor_version ; then + if test $ft_config_micro_version -lt $ft_min_micro_version ; then + ft_config_is_lt=yes + fi + fi + fi + fi + fi + if test x$ft_config_is_lt = xyes ; then + no_ft=yes + else + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $FT2_CFLAGS" + LIBS="$FT2_LIBS $LIBS" + + # + # Sanity checks for the results of freetype-config to some extent. + # + AC_RUN_IFELSE([ + AC_LANG_SOURCE([[ + +#include <ft2build.h> +#include FT_FREETYPE_H +#include <stdio.h> +#include <stdlib.h> + +int +main() +{ + FT_Library library; + FT_Error error; + + error = FT_Init_FreeType(&library); + + if (error) + return 1; + else + { + FT_Done_FreeType(library); + return 0; + } +} + + ]]) + ], + [], + [no_ft=yes], + [echo $ECHO_N "cross compiling; assuming OK... $ECHO_C"]) + + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi # test $ft_config_version -lt $ft_min_version + fi # test x$enable_fttest = xyes + fi # test "$FT2_CONFIG" = "no" + + if test x$no_ft = x ; then + AC_MSG_RESULT([yes]) + m4_if([$2], [], [:], [$2]) + else + AC_MSG_RESULT([no]) + if test "$FT2_CONFIG" = "no" ; then + AC_MSG_WARN([ + + The freetype-config script installed by FreeType 2 could not be found. + If FreeType 2 was installed in PREFIX, make sure PREFIX/bin is in + your path, or set the FT2_CONFIG environment variable to the + full path to freetype-config. + ]) + else + if test x$ft_config_is_lt = xyes ; then + AC_MSG_WARN([ + + Your installed version of the FreeType 2 library is too old. + If you have different versions of FreeType 2, make sure that + correct values for --with-ft-prefix or --with-ft-exec-prefix + are used, or set the FT2_CONFIG environment variable to the + full path to freetype-config. + ]) + else + AC_MSG_WARN([ + + The FreeType test program failed to run. If your system uses + shared libraries and they are installed outside the normal + system library path, make sure the variable LD_LIBRARY_PATH + (or whatever is appropiate for your system) is correctly set. + ]) + fi + fi + + FT2_CFLAGS="" + FT2_LIBS="" + m4_if([$3], [], [:], [$3]) + fi + + AC_SUBST([FT2_CFLAGS]) + AC_SUBST([FT2_LIBS])]) + +# end of freetype2.m4 + +# Configure paths for SDL +# Sam Lantinga 9/21/99 +# stolen from Manish Singh +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS +dnl +AC_DEFUN([AM_PATH_SDL], +[dnl +dnl Get the cflags and libraries from the sdl-config script +dnl +AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], + sdl_prefix="$withval", sdl_prefix="") +AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], + sdl_exec_prefix="$withval", sdl_exec_prefix="") +AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], + , enable_sdltest=yes) + + if test x$sdl_exec_prefix != x ; then + sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix" + if test x${SDL_CONFIG+set} != xset ; then + SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config + fi + fi + if test x$sdl_prefix != x ; then + sdl_args="$sdl_args --prefix=$sdl_prefix" + if test x${SDL_CONFIG+set} != xset ; then + SDL_CONFIG=$sdl_prefix/bin/sdl-config + fi + fi + + AC_REQUIRE([AC_CANONICAL_TARGET]) + PATH="$prefix/bin:$prefix/usr/bin:$PATH" + AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH]) + min_sdl_version=ifelse([$1], ,0.11.0,$1) + AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) + no_sdl="" + if test "$SDL_CONFIG" = "no" ; then + no_sdl=yes + else + SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags` + SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs` + + sdl_major_version=`$SDL_CONFIG $sdl_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_sdltest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" +dnl +dnl Now check if the installed SDL is sufficiently new. (Also sanity +dnl checks the results of sdl-config to some extent +dnl + rm -f conf.sdltest + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "SDL.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.sdltest"); + */ + { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_sdl_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_sdl_version"); + exit(1); + } + + if (($sdl_major_version > major) || + (($sdl_major_version == major) && ($sdl_minor_version > minor)) || + (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); + printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n"); + printf("*** to point to the correct copy of sdl-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_sdl" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$SDL_CONFIG" = "no" ; then + echo "*** The sdl-config script installed by SDL could not be found" + echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the SDL_CONFIG environment variable to the" + echo "*** full path to sdl-config." + else + if test -f conf.sdltest ; then + : + else + echo "*** Could not run SDL test program, checking why..." + CFLAGS="$CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include "SDL.h" + +int main(int argc, char *argv[]) +{ return 0; } +#undef main +#define main K_and_R_C_main +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding SDL or finding the wrong" + echo "*** version of SDL. If it is not finding SDL, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means SDL was incorrectly installed" + echo "*** or that you have moved SDL since it was installed. In the latter case, you" + echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SDL_CFLAGS="" + SDL_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(SDL_CFLAGS) + AC_SUBST(SDL_LIBS) + rm -f conf.sdltest +]) + +# Configure paths for SMPEG +# Nicolas Vignal 11/19/2000 +# stolen from Sam Lantinga +# stolen from Manish Singh +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_SMPEG([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for SMPEG, and define SMPEG_CFLAGS and SMPEG_LIBS +dnl +AC_DEFUN(AM_PATH_SMPEG, +[dnl +dnl Get the cflags and libraries from the smpeg-config script +dnl +AC_ARG_WITH(smpeg-prefix,[ --with-smpeg-prefix=PFX Prefix where SMPEG is installed (optional)], + smpeg_prefix="$withval", smpeg_prefix="") +AC_ARG_WITH(smpeg-exec-prefix,[ --with-smpeg-exec-prefix=PFX Exec prefix where SMPEG is installed (optional)], + smpeg_exec_prefix="$withval", smpeg_exec_prefix="") +AC_ARG_ENABLE(smpegtest, [ --disable-smpegtest Do not try to compile and run a test SMPEG program], + , enable_smpegtest=yes) + + if test x$smpeg_exec_prefix != x ; then + smpeg_args="$smpeg_args --exec-prefix=$smpeg_exec_prefix" + if test x${SMPEG_CONFIG+set} != xset ; then + SMPEG_CONFIG=$smpeg_exec_prefix/bin/smpeg-config + fi + fi + if test x$smpeg_prefix != x ; then + smpeg_args="$smpeg_args --prefix=$smpeg_prefix" + if test x${SMPEG_CONFIG+set} != xset ; then + SMPEG_CONFIG=$smpeg_prefix/bin/smpeg-config + fi + fi + + AC_PATH_PROG(SMPEG_CONFIG, smpeg-config, no) + min_smpeg_version=ifelse([$1], ,0.2.7,$1) + AC_MSG_CHECKING(for SMPEG - version >= $min_smpeg_version) + no_smpeg="" + if test "$SMPEG_CONFIG" = "no" ; then + no_smpeg=yes + else + SMPEG_CFLAGS=`$SMPEG_CONFIG $smpegconf_args --cflags` + SMPEG_LIBS=`$SMPEG_CONFIG $smpegconf_args --libs` + + smpeg_major_version=`$SMPEG_CONFIG $smpeg_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + smpeg_minor_version=`$SMPEG_CONFIG $smpeg_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + smpeg_micro_version=`$SMPEG_CONFIG $smpeg_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_smpegtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" +dnl +dnl Now check if the installed SMPEG is sufficiently new. (Also sanity +dnl checks the results of smpeg-config to some extent +dnl + rm -f conf.smpegtest + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "smpeg.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.smpegtest"); + */ + { FILE *fp = fopen("conf.smpegtest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_smpeg_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_smpeg_version"); + exit(1); + } + + if (($smpeg_major_version > major) || + (($smpeg_major_version == major) && ($smpeg_minor_version > minor)) || + (($smpeg_major_version == major) && ($smpeg_minor_version == minor) +&& ($smpeg_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'smpeg-config --version' returned %d.%d.%d, but the minimum version\n", $smpeg_major_version, $smpeg_minor_version, +$smpeg_micro_version); + printf("*** of SMPEG required is %d.%d.%d. If smpeg-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If smpeg-config was wrong, set the environment variable SMPEG_CONFIG\n"); + printf("*** to point to the correct copy of smpeg-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_smpeg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_smpeg" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$SMPEG_CONFIG" = "no" ; then + echo "*** The smpeg-config script installed by SMPEG could not be found" + echo "*** If SMPEG was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the SMPEG_CONFIG environment variable to the" + echo "*** full path to smpeg-config." + else + if test -f conf.smpegtest ; then + : + else + echo "*** Could not run SMPEG test program, checking why..." + CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include "smpeg.h" +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding SMPEG or finding the wrong" + echo "*** version of SMPEG. If it is not finding SMPEG, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means SMPEG was incorrectly installed" + echo "*** or that you have moved SMPEG since it was installed. In the latter case, you" + echo "*** may want to edit the smpeg-config script: $SMPEG_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SMPEG_CFLAGS="" + SMPEG_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(SMPEG_CFLAGS) + AC_SUBST(SMPEG_LIBS) + rm -f conf.smpegtest +]) +